منتديات روكشا     َولَوْلَا إِذْ دَخَلْتَ جَنَّتَكَ قُلْتَ مَا شَاءَ اللَّهُ لَا قُوَّةَ إِلَّا بِاللَّه

الرئيسية |  التسجيل  |  مركز رفع الملفات  |  الاتصال بنا  

 



العودة   منتديات روكشا > المنتدي التخصصي > البرامج والتطبيقات > برامج الحاسب

الملاحظات

برامج الحاسب ما يخص الحاسب من برامج وشروحات صيانة وانظمة تشغيل

إضافة رد
 
أدوات الموضوع انواع عرض الموضوع
  #1  
قديم 03-13-2019, 04:42 PM

الصورة الرمزية apple2000

apple2000

عضو معاقب

 
تاريخ التسجيل: Mar 2019
الدولة: غير معروف
المشاركات: 639
معدل تقييم المستوى: 0
apple2000 له مواضيع رائعةapple2000 له مواضيع رائعةapple2000 له مواضيع رائعةapple2000 له مواضيع رائعة
apple2000 غير متواجد حالياً
افتراضي Autodesk HSMWorks 2019.3 build R4.43473

 

Autodesk HSMWorks 2019.3 build R4.43473





Autodesk HSMWorks 2019.3 build R4.43473 | 575.3 mb


Autodesk team has announced the release of HSMWorks 2019.3 build R4.43461, is an integrated 2.5- to 5-axis CAD/CAM programming solution for SOLIDWORKS.


Autodesk HSMWorks 2019.3 Update - Release Notes: Build R43461 / 30 January 2019:

New in this Version
- When there is more than one body in the model, no automatic selection of all the bodies will be done when creating a new Setup. (#8140)
- Added the ability for a grooving tool to go a specified distance below the inner radius while facing the part in a groove turning operation. (#11148)
- Fixed a problem with the retract at the shifted position when expanding the Fine Boring cycle for the post processor. (#11350)
- Avoid creating an extra tool entry when creating a new tool. (#11944)
- Added a new parameter "make sharp corners" to a profile turning toolpath to ensure that outside corners are sharp and not rounded. (#12010)
- Fixed an issue for Turning Profile operations in which leads were not generated at an angle with respect to the toolpath direction when "Use Fixed Lead Direction" was turned off. The problem occurred in both roughing and finishing passes. (#9944, #10284)
- Fixed excessive tool library load time with Harvey tools installed. (#11587)
Changes to toolpath generation
- For the Engrave toolpath, improved the ordering to reduce the distance which the tool jumps when moving between letters in engraved text. (#4968)
- Fixed a problem in the Pocket strategy that could cause an operation to freeze and not finish. (#10484)
- Fixed an issue with the Turning Profile and Turning Groove operations where the tool was not cutting to the inner radius if there was a hole with a diameter greater than the inner radius. (#9921, #10106)
- Fixed an issue where gouge checking for Turning Profile leads was incorrectly being done for the tool nose center instead of the tool contact point. (#11298)
Changes to API
- Fixed missing update of parameters when using HSMWorks_setObjectToolById().
- Added advanced API HSMWorks_setObjectGeometry2() to allow geometry override entity flags to be set.

About Autodesk HSMWorks. Autodesk HSM software bundle provides the best value in integrated CAM software available. Included are HSM add-ons for SOLIDWORKS and Autodesk Inventor. Integrated CAM helps CNC programmers, designers, and engineers rapidly produce machined parts in one seamless workflow, while maintaining model associativity for quick updates to part changes. Whether you are working with multiple CAD formats or starting from pencil sketches, Integrated CAM with your design software is the simplest and fastest way to machine your parts.

HSMWorks is designed from the ground up to work inside SolidWorks, providing a logical extension of the parametric SolidWorks assembly environment into the CAM world. Experienced SolidWorks users will feel right at home working with HSMWorks and will be able to create high-quality toolpaths within minutes. New users will benefit from the comprehensive 2D and 3D CAD capabilities of SolidWorks mechanical design solutions and quickly extend any knowledge gained to the CAM process, resulting in improved design quality and reduced product development time.


About Autodesk. Autodesk helps people imagine, design and create a better world. Everyone-from design professionals, engineers and architects to digital artists, students and hobbyists-uses Autodesk software to unlock their creativity and solve important challenges.

Product: Autodesk HSMWorks
Version: 2019.3.1 build R4.43473
Supported Architectures: x64
Website Home Page :
http://www.hsmworks.com

Language: multilanguage
System Requirements: PC
Supported Operating Systems: Windows 7even or newer
Software Prerequisites: compatible with the 2016 or newer versions of SOLIDWORKS
Size: 575.3 mb


DOWNLOAD LINKS :


كود:
https://rapidgator.net/file/07174a3cd7a4a073c938cab3f14c5e13/Dl4EvEr-HSMWork_2019.3.1.rar.html

http://nitroflare.com/view/CA8A9239548EBDE/Dl4EvEr-HSMWork_2019.3.1.rar

https://turbo.to/gkqowf6wh0ku/Dl4EvEr-HSMWork_2019.3.1.rar.html

http://uploaded.net/file/z65f9zwq/Dl4EvEr-HSMWork_2019.3.1.rar
رد مع اقتباس
إضافة رد

مواقع النشر (المفضلة)


الذين يشاهدون محتوى الموضوع الآن : 1 ( الأعضاء 0 والزوار 1)
 
أدوات الموضوع
انواع عرض الموضوع

تعليمات المشاركة
لا تستطيع إضافة مواضيع جديدة
لا تستطيع الرد على المواضيع
لا تستطيع إرفاق ملفات
لا تستطيع تعديل مشاركاتك

BB code is متاحة
كود [IMG] متاحة
كود HTML معطلة

الانتقال السريع

المواضيع المتشابهه
الموضوع كاتب الموضوع المنتدى مشاركات آخر مشاركة
برنامج Autodesk Revit 2019.2.1 Update apple2000 برامج الحاسب 0 03-12-2019 04:44 PM
Windows 10 Pro Redstone 5 v1809 Build 17763.348 OEM ESD March 2019 apple2000 برامج الحاسب 0 03-11-2019 06:26 PM
ON1 Photo RAW 2019.2 Build 13.2.0.6564 (x64) Include Keygen apple2000 برامج الحاسب 0 03-10-2019 05:17 PM
برنامج TechSmith Snagit 2019.1.0 Build 2653 ابن الوليد برامج الحاسب 0 12-18-2018 07:25 PM
برنامج أحدث إصدار لإسطوانة ||Acronis True Image 2019 Build 14610 ISO ابن الوليد برامج الحاسب 0 11-26-2018 09:06 PM

 

RSS RSS 2.0 XML MAP HTML

الساعة الآن 09:19 PM

نبذة عن المنتدى

روابط مفيدة

إعلانات نصية

روابط الموقع

منتديات روكشا لتقنية المعلومات تقدم كل ما هو جديد ومفيد في عالم البرامج سواء جاهزة أو طرق وشروحات برمجة وتصميم وسوف تجدون أقسام عديدة ومختصة لكل ما تبحث عنه



Powered by vBulletin® Copyright ©2000 - 2019,